The devlin “stitch and glue” method is a superior way to build a wooden boat. it has been developed and refined here at devlin designing boat builders for almost 40 years, and has been adopted by other segments of the wooden boat industry.. Stitch and glue is a simple boat building method which uses plywood panels stitched together, usually with copper wire, and glued together with epoxy resin. this type of construction can eliminate much of the need for frames or ribs. [1]. To see the entire list of stitch-n-glue videos scroll to the bottom of this page. the photo sequence to the right shows the construction of pygmy's osprey triple kayak kit (featured in wooden boat magazine, vol. 131 & 132, 1996), which also uses stitch and glue in its assembly....
Free stitch & glue boat plans; the stitch and glue boatbuilding method is an easy way for a beginner to make a plywood boat. how to build a stitch and glue boat, mark and cut. carefully measure and draw the various parts of your boat on your plywood. this is called lofting. (some plans actually give you full size plans). Basically, stitch and glue boats are constructed by gluing panels of plywood together using epoxy resin and fiberglass. the stitching is used to hold the panels in place while the glue is applied and allowed to cure.. This tutorial is an excellent introduction to stitch and glue boat building, whatever the size of boat you intend to build. almost all the techniques described below can be used for other designs including large sail and power boats..
.jpg)
0 komentar:
Posting Komentar